Food cost calculator.
Add the ingredients of a dish, set the yield after waste and see what a portion costs and what price you need.
Updated 2026-11-19
Estimate for planning, not a quote. Check every figure with the vendor.
How it works
For each ingredient enter the quantity used and its unit cost. Enter the number of portions the recipe yields after trimming, cooking loss and waste.
Formulas: cost per portion = sum of (ingredient quantity x unit cost) / yield after waste. Food cost percentage = cost per portion / menu price. Price at target percentage = cost per portion / target percentage.
Example: ingredients total $6.00 for a batch that yields 4 portions, so cost per portion is $1.50. At a menu price of $5.00, food cost is 30%. To hit 28%, the price is $1.50 / 0.28 = $5.36.
Assumptions and limits
- Unit costs are the ones you enter. Update them when supplier prices change.
- Yield after waste is the most common source of error. Weigh a real batch if you can.
- The calculator covers ingredient cost only. Labor, packaging and overhead are not included.
- Shared sub-recipes (sauces, doughs) should be costed once and used as an ingredient.
How to use the result
Many operators target roughly 28 to 35 percent; yours depends on concept. Pizza, bar and table-service restaurants often differ. Use the number as a reference, not a rule.
Sort your menu by food cost. Dishes far above your target are candidates for a new recipe, a smaller portion or a higher price. Dishes far below it can carry cheaper popular items.
Frequently asked questions
What is a good food cost percentage?
Many operators target roughly 28 to 35 percent. Yours depends on concept, location and mix.
How do I handle waste?
Enter the yield after trimming and cooking loss. If 1 lb of an ingredient yields 0.8 lb usable, use 0.8 lb of usable quantity or adjust the unit cost.
Should I include labor?
Not in food cost. Track labor separately.
How often should I recalculate?
Whenever a key supplier price changes, and at least monthly for your top sellers.
Can this be automated?
Yes. Recipe costing is in the Syrve core, where costs update from purchase prices. Details on the inventory page.
Related
Menu price calculator
Enter what a dish costs and the food cost you want. Get a price, a rounded price, a marketplace price and the dollar margin.
Read moreInventory and recipe costing
Stock, recipes and costing are part of Syrve, down to the ingredient. You do not buy a second product to see food cost.
Read moreFeatures
The point-of-sale is the start. These are the pieces around it, with their status stated plainly.
Read morePricing
Software is priced per month. Card processing is separate: we do not tie you to a processor, and we quote the rate on the demo.
Read moreBook a demo
45 minutes, no pressure. We open Syrve around your concept, show what is live, and say plainly whether it is a fit.
Read moreSee it on your menu, your orders, your numbers.
A 45-minute call. We open Syrve with your concept in mind, show what is live today, and tell you straight whether it fits.