POS cost calculator.
Enter your monthly card volume and ticket count and compare the yearly cost of software and processing across vendors.
Updated 2026-11-19
Estimate for planning, not a quote. Check every figure with the vendor.
How it works
You enter four inputs: monthly card volume, number of card transactions (or average ticket), number of locations and number of devices. Each vendor preset supplies a processing percentage, a fixed fee per transaction and a software price.
Formulas: processing per month = volume x percentage + transactions x fixed fee. Software per month = plan price x locations (or x devices for per-device plans). Yearly cost = (processing + software) x 12. Effective rate = (processing + software) / volume.
The optional early-termination line is a scenario: number of months left x a monthly amount you enter. It is based on what the FTC complaint alleges about one vendor and is not a statement of what any contract says. Use the number from your own agreement.
Assumptions and limits
- Presets are estimates from public sources dated 2026-11, either advertised or per public reviews. Check them with the vendor.
- Syrve via SmartyPOS: software is $59, $99 or $129 per month. Processing and hardware are quote-on-demo inputs, so the calculator uses the value you enter.
- Hardware, add-ons and onboarding are not included unless you add them.
- Different ticket mix and card types change real rates. Use your own statement for a precise figure.
- The result is an illustration, not a quote.
How to use the result
Start with your current month. Put in your real volume and the fees from your statement and check that the effective rate matches. Then change only one input at a time: the processing rate, then the plan, then locations.
Look at the gap, not the absolute figure. A gap of 0.3 points on $60,000 a month is $2,160 a year. If the gap is smaller than the cost of switching, wait for your renewal date.
Frequently asked questions
Is the calculator a quote?
No. It uses published or reported figures, checked 2026-11, and your inputs.
Where do the presets come from?
From vendor pages and public reviews. They are listed in the pricing guide sources.
Why is Syrve processing blank?
Because the rate is quoted on the demo, so you enter a rate you have been offered.
What is the early-termination scenario?
An optional line to see what leaving costs. Enter the number from your own agreement.
Does it include hardware?
Only if you add it. Hardware prices vary widely.
Related
POS cost guide
The monthly software fee is rarely the biggest number. Processing, hardware and contract terms usually decide what you really pay.
Read morePricing
Software is priced per month. Card processing is separate: we do not tie you to a processor, and we quote the rate on the demo.
Read moreCompare
Price, processing, contracts and API access side by side. Each cell carries a source and the month we checked it.
Read moreFood cost calculator
Add the ingredients of a dish, set the yield after waste and see what a portion costs and what price you need.
Read moreBook a demo
45 minutes, no pressure. We open Syrve around your concept, show what is live, and say plainly whether it is a fit.
Read moreSee it on your menu, your orders, your numbers.
A 45-minute call. We open Syrve with your concept in mind, show what is live today, and tell you straight whether it fits.